Stump collector/picker
Stump collector/picker is suitable for tractor from 40kW and is designed for picking small tree roots, stumps and stump pieces (length up to 60cm, ø 8cm).
Functions:
Going along the peat bog, the machine collects small pieces of wood and parts of stump between the peaks, after that with rotation of the drum they are collected to the assembly box. Upon filling the assembly box, it should be emptied to designated /elected place.
Technical information:
- Frame: Welded steel construction
- Hydraulics: Four hydraulic cylinders
- Working width: 2,43m
- Dimensions of the unit: width 4,2m; height 2m; length 3m
- Weight: 2000kg
- Working speed: 5-10km/h
Milling cutter PF-1
Is suitable for excavator with weight from 21 tons
On main machine, ’Roxon’ system ensuring free running of the cutter drum when the engine is off, must be installed. In addition, main machine should allow connections of milling cutter engine to hydraulic tank reflow.
The device is designed for crushing wood and frozen peat at an outdoor temperature between -20 … + 45 ° C (used hydraulic fluid can limit the temperature).
Technical information:
- Frame: Welded steel construction
- Hydraulics: engine and transmission are protected by control regulating valve
- Transmission: V-belts
- Working width: 1,35m
- Dimensions of the unit: 1620x1200x900mm
- Weight: 900kg
- Productivity around 2500 – 3000 m³/day
- Fraction of crushed material: 0-35mm
Stump Remover KJ-2
Stupm Remover is suitable for excavator from 13t and is meant for stump extraction from peat surfaces and loading uprooted wood.
Functions:
A machine with an open grip, which motion is directed towards the main machine, combines at a time through 1.5 meter wide area going up to 70 cm deep, extracting stumps and roots out of the surface. The same device can move extracted stumps and roots to desired place
Technical information:
- Working width 1,5m
- Dimensions of the unit with open jaws 1500x1500x2100mm
- Dimensions of the unit with closed jaws 1500x1500x1100mm
- Weight 870 kg
- Frame: Welded steel construction
- Hydraulics: Two hydraulic cylinders and relief valve
Excavator boom extension
Excavator boom extension is intended to extend the excavation range.
Technical information:
- Frame: Welded steel construction
- Hydraulics: One hydraulic cylinder
- Length: 4m
- Weight: 913kg (with adapter NTP-10)
Peat loading bucket
Peat loading bucket Suitable for excavators from 13t for loading of milled peat.
Technical specification:
- Bucket volume 3.5m³
- Frame: Welded steel construction
- Hydraulics: Two hydraulic cylinders
- Weight 1115 kg
Peat Trailer 40m³
A peat trailer is a device towed by a tractor which is intended for the transport of peat in peat fields.
Technical information:
- Frame: Welded steel construction
- Hydraulics: Four hydraulic cylinders (2 + 2) and hydraulic piping
- Driving tractor power: from 165hp
- Max. permitted speed: 40 km/h
- Unloading: to the side
- Load capacity: 17,900kg